|
May 2, 2006 - Victor, NY -
With an ActiveX command library and USB connection, the new SQ-2300 series bench top motor controller simplifies computer control of New Scale’s piezoelectric SQUIGGLE motors and closed-loop linear nanopositioning stages.
A USB connector provides easy plug-and-play interface with a PC. The New Scale motion control software provides “point and click” SQUIGGLE motor control.
Alternatively, users can call the ActiveX command library from third-party software applications such as LabVIEW. The command library includes both open-loop and closed-loop commands. An intuitive scripting interface allows users to build their own custom scripts using the ActiveX library, if desired.
|
|
|
Multiple SQ-2300 controllers can be connected to one PC via a USB hub and driven simultaneously from a single screen, enabling multi-axis “set and hold” positioning. Using the SQ-2300, SQUIGGLE motor speed can vary continuously from micrometers per second to millimeters per second with better than 20 nanometer position resolution.
The SQ-2300 can also be controlled by an analog input (0 to 3.3 volt) or optional manual handset.
Specifications
| - Input power |
12 V or 24 V at 500 mA |
| - Typical current |
< 200 MA |
| - Output voltage |
~200 V RMS |
| - Computer control |
USB connector; software and ActiveX command library included |
| - Analog control |
I/O port for motor control input |
| - Dimensions |
3.5 x 4.2 x 1.6 inches |
The SQ-2300 motor controller is approximately 30% smaller than the SQ-2000 series controller it replaces, saving valuable lab space.
It is available now at $600, including control software, ActiveX command library, and AC wall power adapter.
About the SQUIGGLE Motor
The patented SQUIGGLE motor design uses a threaded nut and screw to create precise linear movement in a very small
space. Piezoelectric ceramics create ultrasonic vibrations in the nut, causing the screw to rotate and translate
with high precision. SQUIGGLE motors are smaller, more precise, less expensive and more efficient than conventional
electromagnetic motors. In addition, they use 90 percent fewer parts and require no gear reduction, which eliminates
many failure modes. This ceramic motor is fundamentally compatible with high magnetic fields including MRI chambers.
SQUIGGLE motors are used in nanotechnology research, microelectronics, optics, lasers, biotechnology, medical devices,
aerospace and defense, fluid control, and office/consumer products including mobile phone cameras.
About New Scale Technologies, Inc.
New Scale Technologies, Inc. (www.newscaletech.com) makes miniature ceramic motors that enable our customers to create
smaller products and research tools. Our piezoelectric SQUIGGLE motors are smaller, more efficient and more precise
than conventional motors. With very few parts and no gears, this patented piezoelectric motor design uses ultrasonic
vibrations to create precise linear motion. New Scale’s miniature motors are compatible with extreme environments
including vacuum, very low (sub-Kelvin) temperatures, and high magnetic fields.
SQUIGGLE is a registered trademark of New Scale Technologies, Inc.
LabVIEW is a trademark of National Instruments Corporation.
For more information contact:
Fred Haas, Sales Manager, New Scale Technologies
Phone 585-924-4450 x 112
fhaas@newscaletech.com
back to top
© 2006 New Scale Technologies, Inc. All rights reserved.
Privacy Policy.
|
